STURM 01
The FPV drone the production cells build. It is designed around the assembly step.
- Print time per drone
- 20min
- Solder joints at assembly
- 0
- Flight controller and ESC
- Oneboard
Printed spacers. Swappable modules.
The motor spacers and module mounts of STURM 01 are printed in the production cell. One set takes 20 minutes to print, and that print sets the pace of the cell.
The pre-configured kit brings the rest. Assembly needs no soldering. The printed mount takes the module the mission needs. While one drone is assembled, the next set prints.
Flight controller and ESC on one board, designed in-house.
Down to the board layout. The board is manufactured in Europe. Flight controller and ESC are also available as individual boards.
- Flight controller and ESC
- One integrated board, own design, manufactured in Europe
- Individual boards
- Flight controller and ESC, available on request
- Other components
- Mostly from European suppliers
- Flight stack
- Open source, upstream code is public
Performance data is provided under NDA.
We discuss it in a technical briefing, in person or in a call. Questions about the flight software are answered there too.
Request a technical briefing